Function comparison between EasyEDA Standard Edition and EasyEDA Professional Edition

Public

Category	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
File
	New	√	√
	Open	√	√
	Save	√	√
	Save as	√	√
	Save as module	√	√
	File source code	√	√
	Open Print	√	√
	Import	√	√
	Export	√	√
	Export BOM	√	√	Professional Edition Entry: Export-Bill of Materials
	Version Creation/Switch	√	√	Standard Edition Entry: Left Project Bar-Right-Click Project-Version
	Cache Recovery	√	√	Standard Edition Entry: Advanced-Document Recovery
	Recent Projects	×	√
Edit
	Undo	√	√
	Repeat	√	√
	Copy	√	√
	Paste	√	√
	Cut	√	√
	Fan Out	√	√
	Drag	√	√
	Find	√	√
	Find and Replace	✓	√
	Find Similar Objects	√	√
	Mark Position Number	√	√	Special Professional version entrance: Design-Assign bit number
	Bit number position	√	√	Professional version entrance: PCB-Layout-Attribute position
	Array copy	√	√	Professional version: Array object
	Global deletion	√	√
	Clear canvas	√	√
	Unlock all	√	√
	Select object	×	√
Place
	Canvas origin	√	√	Professional version schematic does not support
	Text	√	√
	Arc	√	√
	Picture	√	√
	Line	√	√
	Rectangle	√	√
Format
	Counterclockwise rotation 90 degrees	√	√	The following format functions are all located in the EDA Professional Edition layout menu bar
	Clockwise rotation 90 degrees	√	√
	Horizontal flip	√	√
	Vertical flip	√	√
	Left alignment	√	√
	Right alignment	√	√
	Top alignment	√	√
	Bottom alignment	√	√
	Horizontal center alignment	√	√
	Vertical center alignment	√	√
	Alignment network	√	√
	Horizontal equidistant distribution	√	√
	Vertical equidistant distribution	√	√
	Equally spaced distribution on the left edge	√	√
	Equally spaced distribution on the top edge	√	√
	Move to the top layer	√	√
	Move to the bottom layer	√	√
	Combine	√	√	Standard version entry: Electrical tool toolbar-Combine/dissolve symbols
	Attribute position	√	√	Standard version entry: Edit-Position number position/Name position
View
	Zoom	√	√
	Show network	√	√
	Cross cursor	√	√
	Left column	√	√
	Right column	√	√
	Preview window	√	×
	Fit frame selection	×	√
	Fit all	√	√
	Full screen	√	√
	Window arrangement	√	√
	Highlight network	×	√
Design
	Update components from component library	√	√
	Reset component unique ID	√	√
	Design rules	√	√
	Check DRC	√	√	Standard version entry: Left panel-Design Manager-Check network/DRC
	Assign position number	√	√	Standard version PCB has no assigned position number
	Cross selection Select	√	√	Standard version entry: Tools-Cross selection
Tools
	Symbol Wizard	√	√	Professional version entry: Device Edit Page-Left Panel-Library Design-Wizard
	Package Manager	√	√
	Simulation	√	×	Professional version 2025 support
	Log	×	√
	Netlist comparison	×	√
Manufacturing
	Bill of Materials (BOM)	√	√
	One-click component order	√	√
	One-click PCB/SMT order	√	√
Export
	PDF	√	√
	PNG	√	√
	SVG	√	√
	SVG source code	√	×
Advanced
	History	√	×	Professional version will Supported in 2025
	Document recovery	√	√	Professional version entrance: File-Cache recovery
	Backup project	√	√
	Recycle bin	√	×	Professional version will support in 2025
	Share	√	√	Professional version entrance: Right-click project file-Project management-Share
	Script	√	√	Professional version entrance: Settings-Extension-Script
	Extension	√	√	Professional version entrance: Settings-Extension
Settings
	Shortcut key settings	√	√
	Personal preferences	√	√
	System settings	√	√
	Language settings	√	√
	Schematic/symbol settings	×	√
	PCB/package settings	×	√
	Panel/panel library settings	×	√
	Common font settings	×	√
	Add local font file	×	×
	Add font name	×	√
	Drawing settings	×	√
	Property settings	×	√
	Top toolbar settings	×	√
	Autosave	√	√
Help
	FAQ	√	√
	Tutorial	√	√
	User forum	√	√
	About	√	√
	Feedback	×	√
	Contact	×	√
	Performance diagnosis	×	√
Right panel
	Properties	√	√
	Filter	×	√	Standard version PCB: Floating tools
Left panel
	Project	√	√
	Design manager	√	√
	Design Manager-Object Tree	×	√
	Common Library	√	√
	Component Library	√	√	Professional Edition Entrance: Bottom Library-Device/Reuse Module
	Device Standardization	×	√
Bottom Panel
	Library	√	√	Standard Edition Entrance: Left Panel-Component Library
	Log	×	√
	DRC	√	√	Standard Edition Entrance: Left Panel-Design Manager-DRC
	Search Results	√	√	Standard Edition Entrance: Bottom Information Pop-up Window
Others
	Public Sharing	√	√
	Team Collaboration	√	√
	Multi-board Design	√	√
	Multi-window Cross-positioning	√	√
	Single Window Multi-project Opening	√	×
	Cross-project Replication Copy and paste	√	√
	Copy and paste across windows	×	√
	Show documents in project list at the same time	×	√
	Display component properties on canvas	×	√
	Customize global component properties	×	√
	Customize shortcuts	×	√
	Customize common libraries	×	√
	Bottom component library	×	√
	Prompt component library update	×	√
	Advanced schematic settings	×	√
Recent design/example project
	Project	√	√
	Device	×	√
	Package	×	√
	Reuse module	×	√

Schematic

Classification	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
File
	Export Netlist	√	√	Professional Edition Portal: Export-Netlist
Edit
	Repeat Action	×	√
	Absorption	√	√	Standard Edition Portal: Right Panel-Canvas Properties-Absorption
Place
	Symbol	√	√
	Wire	√	√
	Single Wire Multi-Network Label	√	×	Professional Edition 2025 Support Support, currently need to use shorting symbols to achieve multi-network shorting
	Bus	√	√
	Bus branch	√	√
	Network label	√	√
	Network port	√	√
	Non-connection mark	√	√
	Voltage probe	√	√
	Pin	√	×
	Bezier curve	√	√
	Arrow	√	×
	Free drawing	√	×
	Polygon	√	√
	Ellipse	√	√
	Quick device	×	√
	Table	×	√
View
	Theme	√	√	Professional version entrance: Settings-Panel/Panel Library-Theme
	Drawing tool	√	√
	Electrical tool	√	√	Professional version: Floating tool
	Bottom Panel	×	√
	Grid type	√	√	Standard version entry: right panel-canvas properties-grid style
Design
	Schematic to PCB	√	√
	Update PCB	√	√
	Jialichuang Layout Service	√	√
	Import changes from PCB	×	√
	Generate/update module symbols	×	√
	Update ports from module symbols	×	√
	Design rules	×	√
	Check DRC	√	√	Standard version entry: left panel-design manager-network check
	Assign bit number	√	√	Standard version entry: Edit-mark bit number
	Layout transfer	√	√	Standard version entry: Tools-Layout transfer
	Preview window	×	√
	Drawing presets	×	√
Tools
	Symbol Wizard	√	×	Professional Edition Entrance: Device Edit Page-Left Panel-Library Design-Wizard
	Package Manager	√	√
	Simulation	√	×
	Log	×	√
Export
	DXF	×	√
	Bill of Materials BOM	√	√
	Netlist-Allegro	×	√
	Netlist-PADS	√	√
	Netlist-Protel2	√	√
	Netlist-EasyEDA Professional Edition	×	√
	Netlist-LTSpice	√	×
	Netlist-FreePCB	√	×
Right-click menu on the canvas
	Find related Similar objects	√	√	Professional version entrance: Edit-Find similar objects
	Place components	√	√
	Paste	√	√
	Zoom in	√	√
	Zoom out	√	√
	Fit window	√	√
	Grid size	√	√	Professional version entrance: Right panel-Properties
	Grid size	√	√	Professional version entrance: Right panel-Properties
	Canvas properties	√	√	Professional version entrance: Right panel-Properties
	Filter	×	√
	Previous page	×	√
	Next page	×	√
	Jump to drawing page	×	√
Right-click menu of primitives
	Component-Modify symbol	√	√	Professional version: Edit device
	Component-View specification	√	√
	Component-Report Error	√	√
	Component-Lock	√	×
	Component-Assign/Clear Bit Number	×	√
	Component-Fan-out Net Label/Non-connection Mark	×	√
	Component-View Product Link	×	√
	Component-IPC/DAC-2552 Properties	×	√
	Component-Cross Selection	×	√
	Component-Layout Transfer	×	√
	Wire-Delete Segment	√	√
	Wire-Highlight Net	√	√
	Wire-Batch Rename Wire	×	√
	Wire-Select Single Segment Wire	×	√
	Wire-Select Wire	×	√
	Wire-Select Net	×	√
	Wire-Unhighlight Net	√	√

Symbol design

| Classification | Function | EasyEDA Standard Edition | EasyEDA Professional Edition | Remarks | | :------------: | :----------------------------------- | :----------------------: | :--------------------------: | :-------------------------------------------------------------------- | --- | ----------------- | --- | --- | | File | | | | | | Simulation symbol | √ | × | | | Component symbol | √ | √ | | | Drawing symbol | √ | √ | Standard Edition: Schematic-Floating Tool-Drawing Setting-New Drawing | | | No electrical identification | × | √ | | | Network identification symbol | × | √ | | | Network port symbol | × | √ | | | Batch creation of devices | × | √ | Professional Edition: New-Component-Batch creation | | Place | | | | | | Pin | √ | √ | | | Multi-pin strip | × | √ | | | Multi-pin rectangle | × | √ | | | Canvas origin | √ | √ | | | Text | √ | √ | | | Arc | √ | √ | | | Picture | √ | √ | | | Line | √ | √ | | | Bezier curve | √ | √ | | | Arrow | √ | × | | | Free drawing | √ | × | | | Rectangle | √ | √ | | | Polygon | √ | √ | | | Ellipse | √ | √ | | Tools | | | | | | Symbol Wizard | √ | √ | | | Advanced Symbol Wizard | √ | √ | | | Specification Book Extraction Wizard | √ | √ | Professional version is more powerful | | | Package Manager | √ | √ | | | Pin Manager | √ | √ | Professional version entrance: Left panel-Library Design-Pin Tab | | | Automatic pin layout | √ | √ | Professional version entrance: Layout-Automatic pin layout Bureau | | | Renumber pins | × | √ | | | IPC/DAC-2552 properties | × | √ | | | 3D Model Manager | × | √ | Professional Edition appears when editing the device library |

PCB

Classification	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Edit
	Measure distance	√	√	Professional Edition entrance: Tools-Measure distance
	Measure object margin	×	√
	Merge into closed lines	×	√
	Disperse into independent lines	×	√
	Convert to outline object	√	√	Standard version entry: Right-click component
	Boolean operation	×	√
	Add fillet	×	√
	Add bevel	×	√
Place
	Package	√	√
	Wire	√	√
	Pad	√	√
	Via	√	√
	Through hole	√	√	Professional version entrance: Placement-Grooving area
	Copper pour	√	√
	Automatic copper reconstruction	×	×	Professional version 2025 support
	Solid fill	√	√	Professional version: Fill area
	Dimension	√	√
	Image	√	√
	Connection pad	√	√	Professional version entrance: Tools-Connection pad
	Center arc	√	√
	Protractor	√	√
	Stitching hole	√	√	Standard version entry: Tools-Copper plating batch vias
	Special-shaped pad	×	√
	Board frame	×	√
	Slot area	√	√	Standard version: Solid fill-Type-Slot
	Prohibited area	×	√
	Constrained area	×	√
	Test point	×	√
	FPC reinforcement board	×	√
	Stacking table	×	√
	Drilling table	×	√
	3D shell-frame	×	√
	3D shell-screw column	×	√
	3D shell-side reference line	×	√
	3D shell-side groove area	×	√
	3D shell-top/bottom groove area	×	√
	3D shell-side entity	×	√
	3D shell-top/bottom entity	×	√
Layout
	Self Dynamic layout	×	√
	Exchange positions	×	√
	Flip	√	√	Standard version: Component layer change
	Offset	√	√
	Select reference point alignment	×	√
	Specify spacing distribution	×	√
	Component area distribution	×	√
	Array distribution	√	√
View
	2D preview	√	√
	3D preview	√	√
	Unit	√	√
	Show grid	√	√
	Show real-time line length	√	√	Professional version entrance: Settings-PCB-General-Show real-line wiring length
	PCB tools	√	√
	Layer tools	√	√
	3D shell preview	×	√	Standard version entrance: Quick toolbar-3D icon
	Adapt to board frame	×	√
	Outline view	×	√
	Switch brightness	×	√
	Flip the board	×	√
	Fly the line	√	√	Standard version entry: Design Manager-Network on the left
Design
	Import changes	√	√
	Update PCB to schematic	×	√
	Update layout and routing from reused modules	×	√
	Clear errors	×	√
	Check DFM	×	√
	Network Class Manager	×	√
	Differential Pair Manager	×	√
	Equal Length Net Group Manager	×	√
	Pad Pair Group Manager	×	√
	Update Project Library	×	√
	Draw Partition	×	√
	Partition Manager	×	√
Routing
	Auto-routing	√	√
	Export Auto-routing File	√	√	Professional version entry: Export-Auto-routing (DSN)
	Import Auto-routing Session	√	√	Professional version entry: Import-Automatic routing (SES)
	Differential pair routing	√	√
	Wire length adjustment	√	√
	Clear routing	√	√
	Single-way routing	√	√
	Stretch wire	×	√
	Differential pair routing	√	√
	Multi-way routing	×	√
	Equal length adjustment	×	√
	Differential pair equal length adjustment	×	√
	Fan-out routing	×	√
	Optimize selected routing	×	√
	Routing mode	√	√	Standard version entry: Right panel-Properties-Others
	Routing corner	√	√	Standard version entry: Right panel-Properties-Others
	Routing width	√	√	Standard version entry: Right panel-Properties-Others
	Remove loop	×	√
Tools
	Cross selection	√	√
	Network color Color	√	√
	Border setting	√	√
	Teardrop	√	√
	Panel	√	√
	Copper batch via	√	√	Professional version entrance: Place-Stitch hole
	Measure distance	√	√
	Command	×	√
	Remove unused pads	×	√
	Connect pads	√	√
	Layer manager	√	√
	Copper manager	√	√
	3D model manager	√	√	Professional version 2025 supports direct binding of 3D models in the package library, currently bound to the device library
	IPC/DAC-2552 attributes	×	√
	Jialichuang SMT selection tool	×	√
	Welding auxiliary tool	×	√
	PCB comparison	×	√
Manufacturing
	PCB board making file	√	√	Professional version entrance: Export -PCB board making file
	Coordinate file	√	√	Professional version entrance: Export-Coordinate file
	PCB information	√	√	Professional version entrance: Export-PCB information
	Jialichuang Layout service	√	√	Professional version entrance: Order
Export
	Bill of materials BOM	√	√
	Export PCB board making file Gerber	√	√	Professional version entrance: Export-PCB board making file
	One-click export of manufacturing files	×	×	Professional version 2025 support
	Export coordinate file	√	√	Professional version entrance: Export-Coordinate file
	Jialichuang flying probe test file	×	√
	3D file-Step	×	√	Standard version entrance: File-Export-3D model
	3D file-Obj	√	√
	3D file-Automatic Generate model	×	√
	3D shell file	×	√
	DXF	√	√
	PDF	√	√
	PNG	√	×	Professional version 2025 support
	SVG	√	×
	ODB++8.2	×	√
	IDF3.0	×	×	Professional version 2025 support
	IPC-D-356A	×	×	Professional version 2025 support
	IPC-2581C	×	×	Professional version 2025 support
	Test point report	×	√
	Interactive BOM	×	√
	Netlist file	×	√
	PCB information	√	√
Right-click menu on canvas
	Find similar objects	√	√
	Place components	√	√	Professional version function entry: Place-device/reuse module
	Zoom in	√	√
	Zoom out	√	√
	Fit to window	√	√	Professional version function name: Fit all
	Grid size	√	√
	Grid size	√	√
	Copper pour	√	√	Professional version function entry: Tools-Copper pour manager
	Design rules	√	√	Professional version function entry: Design-Design rules
	Layer manager	√	√	Professional version function entry: Tools-Layer manager
	Canvas properties	√	√	Professional version function entry: Right panel-Properties
	Filter	√	√	Standard version function entry: Layers and elements-Elements
	Grid type	√	√	Standard version function entry: Right canvas properties-Grid style
	Adsorption	√	√	Standard version function entry: Layers and elements-Adsorption
	Adsorption settings	×	√
Component right-click menu
	Find similar objects	√	√
	Offset	√	√
	Update from library	√	√
	Cross selection	√	√	Standard EDA function entry: Tools-Cross selection
	Select	×	√
	Duplicate	×	√
	Move	×	√
	Adapt to selection	√	√
	Highlight	√	√
	Add teardrop	√	√	Standard EDA function entry: Tools-Teardrop
	Fan-out routing	×	√
	Clear attached wire segments	×	√
	Clear connection	√	√
	Combine	√	√	Standard EDA function entry: PCB Tools-Combine and Dissolve
	Attribute position	√	√	Standard EDA function entry: Edit-Number position
	Rotate	√	√
	Flip	×	√
	Edit package	√	√
	Edit device	√	√	Standard version EDA function entry: Schematic-Right click on primitive
	Update project library	×	√
	IPC/DAC-2552 properties	×	√
Right click menu on wire
	Find similar objects	√	√
	Delete connection	√	√
	Delete network	√	√
	Highlight network	√	√
	Offset	√	√
	Select-Overlap	×	√
	Select-Pad pair	×	√
	Select-Connected copper	×	√
	Convert to slot	√	√	Professional version function entry: Right panel-Properties-Layer
	Convert to pad	√	√	Professional version function entry: Right panel-Properties-Layer
	Duplicate	×	√
	Move	×	√
	Insert node	×	√
	Adapt to selected	√	√
	Network color	×	√
	Add chamfer	×	√
	Combine	√	√
	Flip	×	√
	Flip	×	√
Copper pour right-click menu
	Find similar objects	√	√
	Offset	√	√
	Copper pour	√	√
	Select	×	√
	Duplicate	×	√
	Move	×	√
	Insert node	×	√
	Edit outline	×	√
	Disperse into independent lines	×	√
	Convert to other outline elements	×	√
	Adapt to selection	√	√
	Highlight	×	√
	Copper area	√	√
	Combine	×	√
	Offset	√	√
	Rotate	√	√
	Flip	×	√
	Flip	×	√
Right-click menu of pad
	Find similar objects	√	√
	Offset	√	√
	Convert to pad	√	√
	Generate solid fill based on outline	√	×
	Generate polygonal pad based on outline	√	×
	Cross selection	√	√
	Fan-out routing	×	√
	Adapt to selection	√	√
	Highlight	√	√
	Network color	×	√
	Show flying wires	×	√
	Hide flying wires	×	√
	Add-wire	√	√
	Add-via	√	√
	Add-test point	√	√
	Add-teardrop	√	√
Right panel
	Layer	√	√	Standard version: floating tools
Left panel
	Object tree	×	√
Bottom panel
	Command	×	√
	Layer switching	×	√

Package design

Classification	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Placement
	Special-shaped pads	√	√
	Strip-shaped multi-pads	×	√
	Rectangular multi-pads	×	√
	FPC reinforcement board	×	√
Wiring
	Self Dynamic cutting silk screen	√	√
Tools
	Package Wizard	√	√	Professional Edition: Left panel-Library Design-Wizard
	Package Wizard generates IPC-7351B naming	×	×	Professional Edition 2025 support
	Package Wizard generates 3D model	×	×	Professional Edition 2025 support
	Measure distance	√	√
	Smart size	√	√
	Check size	√	√
	Renumber pads	×	√

Other libraries

Classification	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Schematic module
	Place a single schematic page	√	√	Professional version places a single diagram page in the reuse module library
	Generate a unique ID to match the PCB module	√	√
PCB module
	Place a single PCB	√	√	Professional version places a single diagram page in the reuse module library
	Generate a unique ID to match the PCB Module matching	√	√
Reuse module
	Generate module symbol	×	√
	Convert schematic to PCB	×	√
	Update reuse module library	×	×	Professional version 2025 support
3D model library
	Import OBJ	√	√
	Import WRL	√	√
	Import STEP	×	√
	Adjust fineness	×	√
	Replace model	√	√

Panel/Panel library

Classification	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Place
	Pen tool	×	√
	Elliptical arc	×	√
	Ellipse	×	√
	Rectangle	×	√
	Text	×	√
	Picture	×	√
	Canvas origin	×	√
	Smart size	×	√
	Assist	×	√
	Size	×	√
Export
	Panel manufacturing file	×	√
Right-click page menu
	Paste	×	√
	Paste in place	×	√
	Adapt to all	×	√
	Filter	×	√
	Adapt to selected	×	√
	Cut	×	√
	Copy	×	√
	Repeat to original position	×	√
	Delete	×	√
	Select overlap	×	√
	Refresh	×	√
	Properties	×	√
Right-click element menu
	Adapt to all	×	√
	Adapt to selected	×	√
	Cut	×	√
	Copy	×	√
	Repeat to original position	×	√
	Delete	×	√
	Hide	×	√
	Lock	×	√
	Level	×	√
	Select overlap	×	√
	Combination	×	√
	Rotation	×	√
	Flip left and right	×	√
	Flip up and down	×	√
	Conversion	×	√
	Attribute	×	√
Panel layer
	Material boundary layer	×	√
	Auxiliary drawing layer	×	√
	Drilling layer	×	√
	Frame layer	×	√
	Bulging layer	×	√
	Transparent control layer	×	√
	Printing layer	×	√
	Glue-backed hollowing layer	×	√
	Lighting simulation layer	×	√

Format conversion

Classification	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Import
	Migration Standard Edition	×	√
	DXF	√	√
	AltiumDesigner	√	√
	Eagle	√	√
	KiCAD	√	√
	EasyEDA Standard Edition	√	√
	EasyEDA Professional Edition	×	√
	Allegro/OrCad	×	√
	PADS	×	√	Professional Edition supports importing PADS9.5
	Protel	×	√
	LTspice	×	√
Export
	AltiumDesigner	√	√
	PADS	×	√
	EasyEDA Standard Edition	√	×
	EasyEDA Professional Edition	×	√

Team Collaboration

Classification	Function	EasyEDA A Standard Edition	EasyEDA Professional Edition	Remarks
Project
	Lock Project	×	√
	Archive Project	√	×
	Check In and Check Out	×	√
	Partition PCB Drawing	×	√
	Real-time Collaboration	×	×	Professional Edition 2025 Support
	Version Management	√	×	Professional Edition 20 25 years of support for Git-like version management
Permissions
	Add members	√	√
	Role management	√	√
	Project log	√	√
Libraries and modules				Libraries and reused modules of the professional version of EDA are managed in the editor
	Schematic module	√	√
	PCB module	√	√
	Team library	√	√

Desktop Client

Category	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Operation mode
	Fully online mode	√	√
	Semi-offline mode	×	√	Standard version projects are offline, libraries are online; Professional version only has system libraries online, others are offline
	Fully offline mode	×	√
Data storage
	Local	×	√
	Cloud	√	√
Update method
	Automatic update	√	×	EDA client needs manual Automatically download and install updates
Cross-platform
	Windows-AMD64	√	√
	Windows-X86_32	√	×
	Linux-AMD64	√	√
	Linux-LoongArch64	×	√
	Linux-SW_64	×	√
	Linux-ARM64	×	√
	MAC-AMD64	√	√
	MAC-ARM64	×	√
Automatic updates
	Check for new versions	√	√
	Automatically download new Version	×	√
Others
	Set project directory	√	√
	Set library directory	×	√
	Set proxy	×	√
	Replace activation file	×	√
	Automatically backup online projects	√	√
	Automatically backup local projects	√	√
	Clear cache	√	√
	Log tracking	×	√

On-Premise Hosting

Category	Function	EasyEDA Standard Edition	EasyEDA Professional Edition	Remarks
Cross-platform
	Windows-AMD64	×	√
	Linux-AMD64	√	√
Collaboration
	Online review	×	√
	Online chat	×	√
	Check-in and check-out collaboration	×	√
	Real-time collaboration	×	×	Professional version 2025 support
	Set internal library	×	√
	Set watermark	×	√
	Online time statistics	×	√
	Online account statistics	×	√
	Library use Statistics	×	×	Professional Edition 2025 Support
Log
	Enterprise Log	×	√
	Team Log	×	√
	Project Log	×	√
	Account Log	×	√
	Editor Error Log	×	√
Management
	Fine Role and Permission Management	×	√
	Fine Permission Management	×	√
	Account Management	√	√
	Team Management	√	√
	Project Management	√	√
	Enterprise Management	×	√
	Manual License Replacement	×	√
	Automatic Reminder of License Expiration	×	√